In response to the demand for 1045 Honing Pipe, Stainless steel honed tubes, uniform thickness stator tube in the market, after years of continuous exploration and production accumulation, we actively improve products and enhance product quality. Over the years, while maintaining sustained and high-speed growth in economic efficiency and business scale, we have always regarded fulfilling corporate social responsibility as an important part of the company's soft power construction. We adopted technique and quality system management, based on 'customer orientated, reputation first, mutual benefit, develop with joint efforts', welcome friends to communicate and cooperate from all over the world. After years of unremitting efforts and development by all employees of the company, we have been well received and trusted by new and old customers.
Pneumatic Cylinder Tube introduction
Honed Tubes are presicion tubes with smooth inside , they also could be skived and burnished pipe. Tubes or pipes inside tolerance could be H10, H9 or H8. Outside tolerance, wall thickness tolerance are produced according to seamless cold drawn tubes for precision application standard GB/T3639-2009 , EN10305 or DIN2391 standard. Material SAE1020, 20#, ST45, CK45, ST52, E355 tubes and so on for you to choose. IF you are looking for seamless cold drawn honed tubes or SRB tubes for hydraulic cylinder pipes or pneumatic cylinder tubes, please contact us without any hesitation.WUXI HENGTONG PETROLIC MACHINERY manufactures pre honed tubes, ready to hone tubes, honed tubes, skived and roller burnished tubes, chrome bar, piston rods and high-precision cold-drawn steel tubes.
Pneumatic Cylinder Tubes detail
Application: producing of hydraulic/ pneumatic cylinders, pumps, motor shells, transmission shafts and transmission roller steel pipes.
Original: Jiangsu, China
Certification: ISO9001.
Material: SAE1020, 20#, ST45, CK45, ST52, E355
Payment term: TT, LC
Delivery date: usually 20 to 40 days.
Packing: packed in bundle, oiled inside, with caps on both ends.
Market: Middle East/ Africa/Asia/South America/Europe/North America
MOQ: Depends on exact size and material.
Size and Tolerance
Working method | Cylinder ID （mm） | Length （m） | Straightness （mm/m） | Tolerance on ID | Tolerance on WT | Roughness （μm） |
Cold drawn | 40-320 | ≤12M | 0.2-0.5 | / | ±5% | 0.8-1.6 |
Cold rolling | 30-100 | ≥12M | 0.2-0.5 | / | ±5% | 0.8-1.2 |
cold drawn-honed | 40-500 | 8M | 0.2-0.3 | H8-H9 | ±5% | 0.2-0.8 |
Cold drawn-skived | 40-400 | 7M | 0.2-0.3 | H8-H9 | ±5% | ≤0.4 |
Deep hole boring- honed | 320-400 | 8M | 0.2-0.3 | H7-H9 | ±8% | ≤0.8 |
Deep hole boring- skived | 320-400 | 7M | 0.2-0.3 | H8-H9 | ±8% | ≤0.4 |
Mechanical Properties:
Final Supply Condition | Cold finished （Hard）（BK） | Cold drawn and stress-relieved （BK+S or + SR） | Hardness HB | |||
Parameters | T.S obN/mm2 | Elongation δ5% | T.S obN/mm2 | Y.S OsN/mm2 | Elongation δ5% | |
20# (A106B, ST45, E255) | ≧550 | ≧8 | ≧520 | ≧375 | ≧12 | 175 |
45#(CK45) | ≧650 | ≧5 | / | / | / | 207 |
Q345B(ST52, E355) | ≧640 | ≧5 | ≧600 | ≧520 | ≧15 | 190 |
25Mn | ≧640 | ≧5 | ≧600 | ≧510 | ≧15 | 195 |
27SiMn | ≧840 | ≧5 | ≧800 | ≧720 | ≧10 | 230 |
Large diameter honing tube pneumatic cylinder tube For pipes / tubes:
1. Material we have :
DIN2391 standard ST52, St45,EN10305 standard E355,E255, ASTM A106B grade, 16Mn, C20/20#, CK45
2. Chemical composition:
Material | C | Si | Mn | S(≤) | P(≤) | Cr | Ni | Mo | other |
A106B/ C20# | 0.17—0.23 | 0.17—0.37 | 0.35—0.65 | 0.035 | 0.035 | ≤0.25 | ≤0.30 | Cu≤0.25 | |
CK45# | 0.42—0.50 | 0.17—0.37 | 0.50—0.80 | 0.035 | 0.035 | ≤0.25 | ≤0.30 | Cu≤0.25 | |
Q345B | ≤0.20 | ≤0.55 | 1.00—1.60 | 0.040 | 0.040 | V:0.02-0.15 | Nb:0.015-0.06 | Ti:0.02-0.20 | Alt≥0.015 |
ST52 E355 16Mn | ≤0.20 | ≤0.55 | 1.00—1.60 | 0.045 | 0.045 | V:0.02-0.15 | Nb:0.015-0.06 | Ti:0.02-0.20 | 16Mn |
25Mn | 0.22—0.30 | 0.17—0.37 | 0.70—1.00 | 0.035 | 0.035 | ≤0.25 | ≤0.25 | ||
27SiMn | 0.24—0.32 | 1.10—1.40 | 1.10—1.40 | 0.030 | 0.030 | ||||
42SiMn | 0.39—0.45 | 1.10—1.40 | 1.10—1.40 | 0.030 | 0.030 | ||||
42CrMo | 0.38—0.45 | 0.17—0.37 | 0.50—0.80 | 0.025 | 0.025 | 0.90—1.20 | 0.15—0.25 |
Our Advantage
1.Our company's strength, re-credit, keep the contract, to ensure product quality, has won the trust of customers under the principles of various categories and low price.
2.We offer the best service according to your request, ranging from production, processing to packaging, etc.
3.Our products are of high quality at cheap price, and delivered on time.
4. We have a professional sales team to provide you quick and warm service throughout the whole process.
Our Pneumatic Cylinder Kits, Barrels, Tubes for Pneumatic Assembly Kits is of various types and fashionable designs, which explains why it is so competitive in the international market. Hope we are able to produce a far more superb long term with you by our efforts from the foreseeable future. Our crew through skilled training.
Hot Tags: pneumatic cylinder tube, China, manufacturers, suppliers, factory, price, St52 Cold Drawn Tube, 25CrMo4 Seamless Cold Drawn Gas Tube, Piston Rod Chrome Bar, 42CrMo drilling tube, Self Aligned Welding Rotator, E355 Cold Drawn Pipe
