With this motto in mind, we've got become among essentially the most technologically innovative, cost-efficient, and price-competitive manufacturers for Seamless Honed Steel Tube, Self Aligned Boiler Welding Roller, Self Aligned Pipe Welding Roller. We are committed to responding immediately to any needs, suggestions, opinions or complaints from our customers, and to respond and resolve them in the shortest possible time. The company's products are of high quality and are exported to many countries in the world. Since the establishment of our company, we adher to the principle of quality as the basis and integrity as the capital, we sincerely seek cooperation opportunities with domestic and foreign customers. We always develop and design kinds of novel products to meet the market demand and help the guests continuously by updating our products.
Chrome Plated Cylinder Barrel Introduction
Chrome plated Honed Tubes are presicion tubes with smooth inside and with chrome plated , they also could be skived and burnished pipe. Tubes or pipes inside tolerance could be H10, H9 or H8. Outside tolerance, wall thickness tolerance are produced according to seamless cold drawn tubes for precision application standard GB/T3639-2009 , EN10305 or DIN2391 standard. Material SAE1020, 20#, ST45, CK45, ST52, E355 tubes and so on for you to choose. IF you are looking for chrome plated tubes for hydraulic cylinder pipes or pneumatic cylinder tubes, please contact us without any hesitation.
Chrome Plated Cylinder Barrel technical parameters and Details
Application: hydraulic cylinder, pneumatic cylinder, oil cylinder, telescopic cylinder.
Chrome thickness: usually 15 to 20 microns.
Original: Jiangsu, China
Certification: ISO9001.
Material: SAE1020, 20#, ST45, CK45, ST52, E355
Payment term: TT, LC
Delivery date: usually 20 to 40 days.
Packing: packed in bundle, oiled inside, with caps on both ends.
Market: Middle East/ Africa/Asia/South America/Europe/North America
MOQ: Depends on exact size and material.
Size and Tolerance:
Working method | Cylinder ID （mm） | Length （m） | Straightness （mm/m） | Tolerance on ID | Tolerance on WT | Roughness （μm） |
Cold drawn | 40-320 | ≤12M | 0.2-0.5 | / | ±5% | 0.8-1.6 |
Cold rolling | 30-100 | ≥12M | 0.2-0.5 | / | ±5% | 0.8-1.2 |
cold drawn- honed | 40-500 | 8M | 0.2-0.3 | H8-H9 | ±5% | 0.2-0.8 |
Cold drawn-skived | 40-400 | 7M | 0.2-0.3 | H8-H9 | ±5% | ≤0.4 |
Deep hole boring- honed | 320-400 | 8M | 0.2-0.3 | H7-H9 | ±8% | ≤0.8 |
Deep hole boring- skived | 320-400 | 7M | 0.2-0.3 | H8-H9 | ±8% | ≤0.4 |
Production process
Raw material – annealing for material of 45#, 27SiMn, 25Mn – Acid cleaning – parkerizing & Saponifying – cold drawn – leveling – saw off bad section – stress relieving – leveling –honing or skiving – chrome plating - inspection – oiled plated - packing
Quality control
1. We only buy raw material from famous tube factory, and Checking raw material quality before production.
2. We check the tube ID tolerance, OD tolerance and surface after cold drawn one by one.
3. We inspect the honed tube inside tolerance and surface again one by one after honing or skiving.
4. We measure the chrome thickness .
FAQ
1. Q:How can i get to your factory?
A:Our factory is near shanghai Airport, and then you could take fast train from Shanghai to Wuxi Station.
2. Q:If i will need to stay in your place for few days, is that possible to book the hotel for me?
A:It’s always my pleasure, hotel booking service is available.
3. Q:What is your minimum order quantity, can you send me samples?
A: the Exact MOQ depends on your exact requirement. And sample is available.
4. Q:What is the delivery time?
A: Usually from 20 to 40 days.
5. Q: May i know which payment will be accepted by your company?
A:So far 30% deposit paid by T/T, balance before delivery. L/C at sight also ok.
6. Q:Is your price competitive?
A: Only good quality we supply. Surely we will give you best factory price based on
superior product and service.
In the fierce market competition, the 38CrMoALA Screw Barrel for Plastic Extruder produced by our company have won the favor of the majority of customers with reliable quality, good performance and excellent after-sales service. With advanced technology and professional R&D capabilities, our company can gain a foothold in the industry. We are willing to cooperate with domestic and foreign customers for common development! Our solutions have national accreditation requirements for qualified, good quality items, affordable value, was welcomed by individuals all over the world.
Hot Tags: chrome plated cylinder barrel, China, manufacturers, suppliers, factory, price, Conventional Welding Rotator, 1045 Cold Drawn Honed Tube, Hydraulic Steel Honing Pipe, S20C Honing Pipe, Chrome Plated Tubing Honed Tube, Stainless steel honed tubes
