Contact Us

Tel:+86-510-68561667

Fax:+86-510-83958296

Mob:+8615961719877

E-mail:
hengtongwmb@htsyjx.com

Add:Hengtong New Factory, Hengtong Road, Yangshan Town, Huishan District, Wuxi, China

Home > Knowledge > Content
Welding positioner operation requirements and precautions Nov 26, 2018

The Welding positioner must comply with the welder's safe operating procedures during the operation. When installing and disassembling the workpiece, it is effective to check whether the circular pressure plate has been taken out and the pressure plate is returned to the position to prevent the workpiece from damaging the clamp. When lifting the workpiece, it must be level and not swinging greatly to prevent the workpiece from colliding with the fixture to avoid damage to the fixture.

When the Welding positioner is hoisted, it must be installed securely to take the sling away from the workpiece. When disassembling the workpiece, the workpiece must first be slinged with a sling before the workpiece can be loosened. When the workpiece falls on the fixture, it should be handled lightly and must not have excessive impact on the fixture and the positioner.

The workpiece mounting of the Welding positioner must be positioned according to the requirements. The nuts and bolts of all the clamps must be tightened, and the pressure plate is pressed tightly. After the installation is completed, it is necessary to test and check, and confirm that it can be officially operated after being stabilized. Before turning, check if there are other items in the working range to avoid collision. After the workpiece is transferred to the working position, the power switch must be turned off to cut off the power supply to prevent malfunction.

The workpiece mounting of the Welding positioner must pay attention to the work center and must not deviate from the center of gravity. Do not overload or overload. When the workpiece needs to be raised and welded, the climbing pedal must be used, and the climbing pedal must be placed securely before lifting. Involving the user's concept of equipment and equipment, as well as considering the different uses for handlebar welding and automatic welding, when selecting and designing the Welding positioner, in addition to the main displacement degree of freedom, it is also necessary to increase the auxiliary displacement degree of freedom.http://www.ht-tube.com/