1) In the area to be disconnected, please use a towel or a soft cloth to thoroughly clean the oil, dirt or soil on the surface of the cold drawn seamless pipe.
(2) Try to choose a special type for stainless steel plate breaking.
(3) For the disconnected parts, it is necessary to cooperate with the construction drawings and the situation on the spot. Use a tape measure or other special measuring tools to draw the position and direction and mark the disconnection line.
(4) When disconnecting, please use cold-drawn seamless tubes such as vise to fix the equipment, and laser cutting again after it is fixed.
(5) The broken surface of the cold-drawn seamless pipe should maintain a true circle, and the breaking line should be at an oblique angle to the pivot of the cold-drawn seamless pipe. Excessive force is the reason for cutting the cold-drawn seamless pipe into flat or oval shape, so the cold-drawn seamless pipe should be cut with reasonable energy.
(6) The iron pins and burrs on the broken surface are completely eliminated by using a file knife or appropriate special tools to prevent the iron pins and burrs from scratching the vulcanized rubber O-ring when they are inserted into the connector parts.