Knowledge

The rolling pipe is the main body of the hydraulic cylinder when it is used, and the inner hole is generally manufactured by precision machining processes such as boring, reaming, rolling or honing pi

The honing process is performed by the honing process to greatly improve the dimensional accuracy, roundness, straightness, cylindricity and surface roughness of the holes and the outer circle by remo

In the process of operation, the welding roller frame automatically adjusts the swing angle of the wheel set according to the diameter of the workpiece, and can automatically adjust the center. When m

In the process of operation, the welding roller frame is independent of the driving roller and the driven roller. During operation, it can be arbitrarily combined according to the weight and length of

The main feature of the welding roller frame during the operation is the application of pressure during the welding process without the addition of filler material. The welding roller frame simplifies

The welding positioner is mainly used to drag the workpiece to be welded during the operation, so that the welding bead can be moved to the ideal position for the welding operation. The welding positi

The tilting drive of the welding positioner should be stable during the operation, and it should not be shaken under the maximum load, and the whole machine should not be overturned. If the maximum lo

The welding positioner mainly uses stepping motor and ring seam welding turret in the process of operation. It is very simple in the process of operation. The welding positioner is mainly controlled b

During the operation of the welding positioner, the relevant moving parts and the guide rails and rollers should be coated with lubricating grease, and the closed transmission part should be lubricate

The welding positioner is required to comply with the welder's safe operating procedures during operation.

The rotating head speed of the welding positioner can be adjusted. To some extent, it will have an independent speed control circuit and a dial switch to directly preset the length of the weld. The ti

The weight position and eccentricity of the welding positioner on the entire work surface should be guaranteed within the corresponding data range, and the certain capacity must be ensured. In additio