Knowledge

Precision chrome plated steel bar process principle, the current piston rod piston rod discoloration, mainly the following three hydraulic systems have high temperature phenomenon, the piston rod in t

Process analysis of chrome plated steel bar parts

What are the specific operation methods for the surface treatment of the skived and roller burnished tube?

The high-precision cold drawn tube is made of a small diameter seamless steel tube using a drawing die, usually processed by annealing, pickling and drawing. During the drawing process of cold-drawn s

High-precision cold drawn tubes are one type of steel pipe, that is, one classified according to the production process, which is different from the hot-rolled (expanded) pipe. It is formed by multi-p

​The puncture of the cold drawn steel tube is characterized by a rough surface on the surface of the product, also known as pockmark. More continuous into pieces, also local or periodically distribute

High-precision cold drawn tubes are in need of maintenance, such as steel-synthesized, easy to rust, resulting in its use is not better than before, long-term use will be aging.

The cold brittleness (or low-temperature embrittlement tendency) of the cold drawn steel tube is expressed by the toughness-brittle transition temperature Tc. High purity iron (0.01% C) has a Tc at 10

Cold drawn steel tube is a high-precision steel tube material that uses cold drawn tube as the raw material for tolerance control and surface finishing. The precision cold drawn tube has the character

First, the gasoline pump draws the oil from the fuel tank to the atomizer, and after the atomization, it burns to generate force! This force drives the movement of the piston. The piston then transmit

After the hydraulic cylinder bar of the hydraulic cylinder is pulled, if it is not treated in time, it will affect the normal use, but the hydraulic cylinder will not work. Our repair method is to rep

Question 1: Is there a cylinder with a chrome steel rod that can rotate wirelessly, requiring only 20 revolutions per minute?