How to deal with the defects of the inner diameter of the honing pipe--the pits and pores on the surface of the quilted pipe are also related to the defects of the pipe itself. We should try to avoid the problems caused by the pipe itself, and try to further process the pipe to reduce the pores and pits. When defects occur, the production efficiency and quality of pipes will be improved.
This product is a high-precision grinding process, not only for round holes, but also for hardened tooth surfaces, but the former is more. In fact, it is also a way of polishing. Combination abrasive tools can be used, and it can be installed on a floating fixture, so it can be self-adjusted in a small amount. Therefore, the shape error of the hole can be eliminated, but the shape and position error of the hole cannot be eliminated. For polishing thick-walled honing pipes , a soft polishing wheel or a disc-shaped polishing disc is used, plus a polishing paste, which is an abrasive, to finely process the workpiece and obtain a high surface finish. . But because it has no rigid reference surface in the processing process, it cannot eliminate the form and position error. However, compared with honing, the honing tube can polish irregular surfaces.
https://www.ht-tube.com/