News

The weight of the welding positioner equipment and the center of gravity and eccentricity of the weldment on the entire work surface should be guaranteed within the corresponding data range, and al...

The design principle of the conventional tank welding roller is

The piston rod has two kinds of solid rods and hollow rods. The solid rod has high strength, simple processing and more applications. Hollow piston rods are mostly used in large hydraulic cylinders...

The piston rod is a connecting part that supports the work of the piston. Most of them are used in the cylinder and cylinder movement executing parts, and are a moving part with frequent movement a...

If you encounter a piston rod overheating during use, we should handle it like this:

The principle of high-frequency quenching: placing the workpiece in an inductor wound with a hollow copper tube, and after introducing high-frequency alternating current, forming an induced current...

Generally, the seamless steel pipe is formed by hot-rolled or cold-rolled low-alloy structural steels such as 10, 20, 30, 35, 45 and other high-quality carbon steels such as 16Mn and 5MnV or 40Cr, ...

If the positioner selects the tilt drive mode, then the positioner will be stable when running, and there will be no tilt. In time, the conformance of the positioner has reached its limit, and the ...

The rubber wheel of the welding turning roll is a raw material made of rubber raw materials and mixed with rubber. The rubber compound is used as a raw material for the rubber mixing, and the formu...

The structure of the welding positioner is:

The welding turning roll combined with the welding operation machine and the welding positioner can realize the automatic welding of the inner and outer ring seams, the fillet welds and the inner a...

There are many types of welding turning rolls, but the main types and widely used types are self-adjusting welding roller frames. This type of roller carriage is mainly used for welding cylindrical...